Step 1 / 7
Cut a round hole (Ø 68 h 50) Suited for indoor, non-sloped ceilings only.
Step 2 / 7
Connect the wires with wago connectors. For serial connection, respect polarity.
Step 3 / 7
Insert the plaster ring and securely fasten it with glue or the appropriate screws on a screwfast surface. The attachment must be able to obtain a static load of 5 kg. It’s the installers responsability to ensure optimal attachment. We advise to test the electrical connection before starting to plaster.
Step 4 / 7
Excercise caution while plasering, do not damage the ring. Keep the plaster lid inside the plaster ring while plastering. Use a fiberglass mesh tape for optimal plaster adhesion. Make sure not to touch the edge of the ring when sanding.
Step 5 / 7
Carefully remove excess plaster to access the screw. You can easily locate the jack kit by using a magnet.
Step 6 / 7
Twist the yellow plaster lid with a screwdriver before removing it with a magnet.
Step 7 / 7
Twist the yellow plaster lid with a screwdriver before removing it with a magnet.
Installation must be done by skilled professionals only and instructions must be followed at all times. Warranty will not apply in case of wrongful use of if unskilled personnel attempts to repair a product.